LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Throttle Body >> Installation >> Installation - 2.4L Turbo

Installation - 2.4L Turbo

  1. Discard old gasket and clean intake manifold surface.
  2. Install the throttle body.
  3. Install the 3 bolts to the throttle body and tighten to N.m 11.8 +/- 20 (105 in. lbs.).
  4. Connect the purge hose to the throttle body.
  5. Connect the throttle body inlet hose to the throttle body and tighten clamp.
  6. Install bracket.
  7. Install the 2 screws for the throttle cable bracket and tighten to N.m 11.8 +/- 20 (105 in. lbs.).
  8. If equipped with speed control, install speed control cable to the throttle cam by sliding clasp in the hole used for throttle cable.
  9. Install the throttle cable to the throttle body cam.
  10. Install the throttle control shield.
  11. Connect and lock the electrical connectors from the idle air control motor and throttle position sensor.
  12. Connect and lock the electrical connector for the inlet air temperature sensor.
  13. Connect the negative battery cable.
scientia non olet · About LEMON Manuals