LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Rear Seat Back Cover >> Installation

Rear Seat Back Cover: Installation

  1. Position seat back cover on seat back.
  2. Install hog ring on right side listing pocket of cover to foam, starting in the middle and lining up the die cuts in the listing pocket with the hog ring windows in the foam (three places).
  3. Repeat for the left side listing pocket of cover.
  4. Place cover seams in salvage trenches of foam.
  5. Roll corners and edges of cover over foam.
  6. Flip seat over making sure cover is pulled up over frame on all corners. Push top, bottom, inside, outside, corners of the foam into the cover and engage J-strap retainers.
  7. Install rear seat back (Refer to REAR SEAT BACK  ).
scientia non olet · About LEMON Manuals