LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Front Seat >> Installation >> Installation - Airbag Equipped

Installation - Airbag Equipped

  1. Place front seat in position in vehicle.
  2. Connect front seat wire harness connector to body harness connector.
  3. Connect airbag wire harness connector. Be certain airbag connector is secure and locking tab is in the "locked" position before installing seat retaining bolts.
  4. Install bolts attaching the front of seat track to the floor kick up. Tighten bolts to 61 N.m (45 ft. lbs.) torque.
  5. Install bolts attaching rear of seat track to the floor. Tighten bolts to 61 N.m (45 ft. lbs.) torque.
  6. Connect the remote negative battery cable.
  7. Using the DRB III Scan Tool erase all DTC's and perform airbag system diagnostics.
  8. Verify front seat operation.
scientia non olet · About LEMON Manuals