Diagnosis And Testing - Power Mirror Switch
- Remove power mirror switch.
- Disconnect wire harness connector from back of power mirror switch.
- Using an ohmmeter, test for continuity between the terminals of the switch (Fig 1) as shown in MIRROR SWITCH TEST .
- If test results are not obtained as shown in the Mirror Switch Test table, replace the switch.
MIRROR SWITCH TEST
| SWITCH POSITION MOVE BUTTON | CONTINUITY BETWEEN TERMINALS |
|---|---|
| MIRROR IN "L" POSITION | |
| UP | PIN 11 TO 12 PIN 12 TO 13 PIN 9 TO 1 |
| RIGHT | PIN 11 TO 1 PIN 9 TO 7 PIN 9 TO 8 |
| DOWN | PIN 11 TO 1 PIN 9 TO 12 PIN 9 TO 13 |
| LEFT | PIN 11 TO 7 PIN 11 TO 8 PIN 9 TO 1 |
| MIRROR IN "R" POSITION | |
| UP | PIN 11 TO 12 PIN 11 TO 13 PIN 9 TO 2 |
| RIGHT | PIN 11 TO 6 PIN 9 TO 7 PIN 9 TO 8 |
| DOWN | PIN 11 TO 6 PIN 9 TO 12 PIN 9 TO 13 |
| LEFT | PIN 11 TO 7 PIN 11 TO 8 PIN 9 TO 6 |