LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame System & Bumper System >> Rear Fascia >> Installation

Rear Fascia: Installation

  1. Connect main wire connector to the body harness connector.
  2. Place rear fascia in position on bumper reinforcement.
  3. Align the two fascia studs to the quarter panel vertical attachment, at the same time align the fascia key hole slot on the horizontal flange with the drive pin. Push fascia forward to engage the fasteners.
  4. Install push pins attaching top of fascia to body.
  5. 300M only, install nut on fascia stud and install tail lamp and fasteners under tail lamp.
  6. Install trunk carpet back in position.
  7. Install fasteners attaching fascia to rear quarter panel and splash shields.
scientia non olet · About LEMON Manuals