Latch Release Cable: Removal
- Release hood latch by using the inside release, if still functioning. If not reach up through the bottom of the fascia opening and release the latch pawl lever.
- Disconnect hood release cable ferrule and cable end from hood latch assembly (Fig 1
) or (Fig 2
).
Courtesy of DAIMLERCHRYSLER CORP.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove left cowl side trim panel.
- Remove screws attaching hood latch release cable handle to the cowl side.
- Remove left wheel splash shield.
- Disengage release cable from routing clips.
- Roll carpet back to expose cable.
- Release taped on cable clip from dash liner (Fig 3
).
Courtesy of DAIMLERCHRYSLER CORP.
- Release the rubber grommet from the dash panel. Pull cable through the dash panel access hole.
- Remove cable from vehicle.