LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Servo >> Installation

Cruise Control Systems: Servo: Installation

  1. With throttle in full open position align hole in speed control cable sleeve with hole in servo pin and install retaining clip.
  2. Connect vacuum hose to servo.
  3. Connect electrical connector.
  4. Insert servo studs through holes in speed control cable and mounting bracket.
  5. Install nuts, tighten to 6.7 N.m (60 in.lbs.).
  6. Install servo and bracket and tighten bolt and nuts.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals