LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Wipers/Washers >> Diagnosis And Testing >> Diagnosis And Testing - Wiper System Conditions >> Wipers Run At Low Speed With Switch In High Speed Position

Wipers Run At Low Speed With Switch In High Speed Position

  1. Check for faulty HI-LO wiper relay.
  2. Using an ohmmeter, check for open circuit between terminal C of the HI-LO wiper relay and terminal 12 of the BCM 33 bone 12-way connector. If OK, go to Step 3. If not OK, repair as necessary.
  3. Check wiper switch.
  4. Check for binding linkage
  5. Refer to MOTOR RUNS SLOWLY AT ALL SPEEDS  .
scientia non olet · About LEMON Manuals