LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SE >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Fuel Injection System >> Map Sensor >> Installation >> Installation - 2.7L

Installation - 2.7L

  1. The sensor mounts onto intake manifold plenum (Fig 1). Tighten screws to 4.5 N.m (40 in.lbs.) torque.
  2. Attach electrical connector to sensor (Figure).
  3. Install the negative battery cable.
    Fig 1: Map Sensor O-Ring
    G03498698Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals