LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Electrical Diagnostics >> Diagnosis And Testing >> DTC P0222: Apps Signal #2 Circuit Low >> Diagnostic Test >> 9. Apps Sweep

9. Apps Sweep

With the ignition on.

With the DRB III(R), monitor the APPS #2 voltage.

Slowly open the throttle from the idle position to the wide open throttle position.

Does voltage start at approximately 0.45 of a volt and go above 2.1 volts with a smooth transition? 

  1. Yes  >> Go To 10
  2. No  >> Replace the Accelerator Pedal Position Sensor. See FUEL SYSTEM article.

    See POWERTRAIN VERIFICATION TEST - VER 2  .