Speed Control - Service Information: Description
WARNING:
THE USE OF SPEED CONTROL IS NOT RECOMMENDED WHEN DRIVING CONDITIONS DO NOT PERMIT MAINTAINING A CONSTANT SPEED, SUCH AS IN HEAVY TRAFFIC OR ON ROADS THAT ARE WINDING, ICY, SNOW COVERED, OR SLIPPERY.
NOTE:
A cable and a vacuum controlled servo are not used. This is a servo-less system.
Control of the speed control system is accomplished by a speed control switch (1) which is located just above the multifunction switch (2). The speed control system also uses other components of the vehicle to accomplish its tasks. The five other major components used are as follows; The PCM, Accelerator Pedal Position Sensor, Kickdown Simulator Switch, Throttle Body and the Clutch Pedal Position Switch (Manual Transmission). The speed control system is designed to operate at speeds above 25 MPH. (40 km/h).