When Monitored and Set Condition
- When Monitored: With the engine running between 1000 and 2000 RPM, engine load between 15% to 50%, closed loop mode, the three way catalytic converter temperature is greater than 380°C (716°F), and the O2 sensor heater must be ON for at least 220 seconds to enable the signal inactive portion of the test.
- Set Condition: The high limit: O2 Sensor voltage is greater than 1.5 volts for approximately 5 seconds. The low limit: O2 Sensor voltage is less than 0.15 volts for approximately 5 seconds. Signal stays at center: The O2 Sensor voltage stays between 0.4 and 0.6 volts for more than approximately 15 seconds after the O2 Sensor heater has been ON for at least 220 seconds.