LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Electronic Control Modules - Electrical Diagnostics >> Diagnosis And Testing >> *No Response From Instrument Cluster >> Diagnostic Test >> 2. Fused Ignition Switch Output Circuit(S) Open

2. Fused Ignition Switch Output Circuit(S) Open

With the ignition on.

Measure the voltage of the Fused Ignition Switch Output circuits at the IC harness connectors.

Fig 1: Measuring Voltage Of Fused Ignition Switch Output Circuits At IC Harness Connectors
G01837936Courtesy of DAIMLERCHRYSLER CORP.

Is the voltage above 10 volts? 

  1. Yes  >> Go to 3
  2. No  >> Repair the Fused Ignition Switch Output circuit(s) for an open.

    See BODY VERIFICATION TEST  .

scientia non olet · About LEMON Manuals