LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Coolant Level Sensor >> Removal

Coolant Level Sensor: Removal

  1. Partially drain the cooling system. See DRAINING COOLING SYSTEM .
  2. Disconnect the coolant level sensor harness connector (1).
  3. Depress the locking tabs and pull the coolant level sensor (2) from the coolant recovery reservoir.
    Fig 1: Removing Coolant Level Sensor
    G01837770Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals