LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Electrical Diagnostics >> Diagnosis And Testing >> DTC P0600: Lost Comm With Electric Gear Shift Module (SLA) >> Diagnostic Test >> 12. Intermittent Wiring And Connectors

12. Intermittent Wiring And Connectors

The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition.

NOTE: Check connectors - Clean/repair as necessary. Poor pin to terminal connections can set DTCs.
NOTE: Check for any Technical Service Bulletins that may apply.

Using the wiring diagram/schematic as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the wires while checking for shorts and/or open circuits.

Were there any problems found? 

  1. Yes  >> Repair as necessary.

    See POWERTRAIN VERIFICATION TEST - VER 2  .

  2. No  >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition.
scientia non olet · About LEMON Manuals