LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Electrical Diagnostics >> Circuit Tests >> Engine Oil Sensor Over Temperature >> Diagnostic Test >> 10. Intermittent Wiring And Connectors

10. Intermittent Wiring And Connectors

The condition that caused this DTC to set are currently not present.

Inspect the related wiring harness for a possible intermittent condition.

NOTE: Check connectors - Clean/repair as necessary. Poor pin to terminal connections can set DTCs.
NOTE: Check for any Technical Service Bulletins that may apply.

Using the wiring diagram/schematic as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the wires while checking for shorts and open circuits.

Were there any problems found? 

  1. Yes  >> Repair as necessary.

    See POWERTRAIN VERIFICATION TEST - VER 2  .

  2. No  >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition.