LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System >> Driver Door Lock Switch >> Installation

Driver Door Lock Switch: Installation

    NOTE: Ensure the harness is routed and secured in its original position to avoid potential interference with moving parts.
  1. Install the door harness assembly into the door.
  2. Install the driver door lock switch into the door latch assembly.
  3. Install the door watershield.
  4. Install the door interior trim panel. See BODY article.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals