LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> (Nag1 Automatic Transmission - Electrical Diagnostics) >> Diagnosis And Testing >> DTC P0715: N2 Input Speed Sensor Circuit >> Diagnostic Test >> 4. N2 Input Speed Sensor Signal Circuit Open

4. N2 Input Speed Sensor Signal Circuit Open

With the ignition off.

Measure the resistance of the N2 Input Speed Sensor Signal circuit from the TCM C2 harness connector to the Transmission Solenoid Assembly harness connector.

Fig 1: Measuring Resistance Of N2 Input Speed Sensor Signal Circuit
G01859361Courtesy of DAIMLERCHRYSLER CORP.

Is the resistance below 5.0 ohms  ?

  1. Yes  >> Go To 5
  2. No  >> Repair the N2 Input Speed Sensor Signal circuit for an open.

    See TRANSMISSION VERIFICATION TEST .