Tire Pressure Sensor: Notes
CAUTION:
DO NOT use tire sealant or balance beads if your vehicle is equipped with TPM system, as damage to the sensors may result.
CAUTION:
To prevent moisture and contamination from entering the valve stem, the cap used on this valve stem contains an "O" ring seal. Retain original valve stem cap for reuse. DO NOT substitute a regular valve stem cap in its place. After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt entry into the valve stem, which could damage the wheel rim sensor.
CAUTION:
The valve stem used on this vehicle is made from aluminum, and the core is nickel-plated brass. Retain original valve stem core for reinstallation. DO NOT substitute a valve stem made of a different material, as the different metals will cause corrosion.
CAUTION:
DO NOT reuse the sensor-to-wheel grommet. Always use a new grommet when installing a pressure sensor and properly torque the sensor nut.
CAUTION:
DO NOT try to install a tire pressure sensor in a steel wheel or aftermarket wheel. Use only in original style factory wheels.