LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Voyager LX, 3.3 R >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Removal >> Removal - 2.4L

Removal - 2.4L

  1. Release hood latch and open hood.
  2. Disconnect battery negative cable.
  3. Disconnect the Inlet Air Temperature sensor.
  4. Remove the Air Box, refer to the ENGINE - AIR CLEANER-REMOVAL for more information.
  5. Remove the EVAP Purge solenoid from its bracket and reposition.
  6. Disconnect the push-in field wire connector from back of generator.
  7. Remove nut holding B+ wire terminal to back of generator.
  8. Separate B+ terminal from generator.
  9. Remove accessory drive belt, refer to the COOLING SYSTEM for proper procedures.
  10. Remove the generator.
scientia non olet · About LEMON Manuals