LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Voyager Base, 3.3 3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Removal & Installation >> Input Speed Sensor >> Installation

Input Speed Sensor: Installation

  1. Verify O-ring is installed into position. See Figure.
  2. Install and tighten input speed sensor to 20 ft. lbs. (27 N.m).
  3. Connect speed sensor connector.
  4. Connect battery negative cable.
scientia non olet · About LEMON Manuals