LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Voyager Base, 3.3 3 >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Memory Set Switch >> Installation

Memory Set Switch: Installation

  1. Position the memory switch and install and tighten the two screws that secure the memory switch to the back of the driver side front door trim panel switch bezel. Tighten the screws to 2.2 N.m (20 in. lbs.).
  2. Reconnect the memory switch wire harness connector to the memory switch.
  3. Install the trim panel switch bezel onto the driver side front door.
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals