LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Voyager Base, 3.3 3 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Full Open Switch >> Removal

Full Open Switch: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the lift gear and link rod assembly from the vehicle (Refer to REMOVAL  ).
  3. Cut the two wires leading to the full open switch or back the wires out of the electrical connector (Figure ). Refer to the WIRING for detailed instructions.
  4. Remove the full open switch retaining screw and remove the full open switch from the gear motor housing assembly.
scientia non olet · About LEMON Manuals