Monitored & Set Conditions

NOTE: If a Manifold Absolute Pressure (MAP) High or Low DTC set along with P0106, diagnose the DTC P0107: MAP SENSOR LOW or DTC P0108: MAP SENSOR HIGH first before continuing.

NOTE: For component location, see COMPONENT LOCATIONS . For connector identification, see CONNECTOR IDENTIFICATION . For circuit identification and wiring diagram, see WIRING DIAGRAMS . In testing procedures Alpha/Numeric character in parentheses (i.e. K4) designates circuit. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-5 under VERIFICATION TESTS to ensure system is functioning properly.

The MAP sensor performance is monitored with engine greater than 64 RPM and the throttle blade at closed throttle. The DTC is set when too small of a difference is seen between barometric pressure with ignition on (engine running) and manifold vacuum for 2.80 seconds.