LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Town & Country Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Removal & Installation >> Output Speed Sensor >> Installation

Output Speed Sensor: Installation

  1. Verify O-ring is installed into position. See Fig 1.
  2. Install and tighten input speed sensor to 20 Ft. Lbs. (27 N.m).
  3. Connect speed sensor connector.
  4. Connect battery negative cable.
Fig 1: Inspecting Speed Sensor O-Ring
G00370768Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals