LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Sebring LXi, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System & Component Testing - Coupe - 3.0L >> Computerized Engine Controls >> Data List Reference

Data List Reference

CAUTION: Driving tests require 2 persons: one driver and one observer.
NOTE: In a new vehicle driven approximately 311 miles (500 km) or less, the step of the stepper motor is sometimes 30 steps greater than the standard value, the injector drive time is sometimes 10% longer than the standard time and the volume air flow sensor output frequency is sometimes 10% higher than the standard frequency.

Data list items consist of MUT-II items and general scan tool (GST) items. When data list is selected using scan tool, data values can be observed. Compare data to normal conditions. See Fig 1 -Fig 10 .

Fig 1: Data List Table - 1 Of 10
G00235641Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 2: Data List Table - 2 Of 10
G00235642Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 3: Data List Table - 3 Of 10
G00235643Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 4: Data List Table - 4 Of 10
G00235644Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 5: Data List Table - 5 Of 10
G00235645Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 6: Data List Table - 6 Of 10
G00235646Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 7: Data List Table - 7 Of 10
G00235647Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 8: Data List Table - 8 Of 10
G00235648Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 9: Data List Table - 9 Of 10
G00235649Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 10: Data List Table - 10 Of 10
G00235650Courtesy of DAIMLERCHRYSLER CORPORATION