Fuel Pump Operation Check
WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Connect scan tool to Data Link Connector (DLC). DLC is located under left side of instrument panel to right of steering column. See Fig 1 . Using scan tool, actuate fuel pump. If fuel pump does not operate, remove fuel pump relay 2. See Fig 2 . Connect a fused jumper wire between battery voltage and fuel pump relay 2 connector terminal No. 3. Listen at open fuel tank inlet for fuel pump operation. Squeeze fuel line between fingers to check for system pressure.