LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Sebring GTC, 2.7 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - System & Component Testing - Coupe - 2.4L) >> Miscellaneous Controls >> Condenser & Radiator Fan Controls >> Fan Controller

Fan Controller

WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect condenser fan motor connector from fan controller. See Figure . Start engine and allow to idle. Maintain coolant temperature at 176°F (80°C) or less. Turn A/C switch on.
  2. Using DVOM, measure voltage across fan controller condenser fan output terminals. Voltage should vary between zero volts, 5.6-10.8 volts and 10.6-15.8 volts. If voltage is not as specified, replace radiator fan motor and fan controller.
scientia non olet · About LEMON Manuals