LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Sebring GTC, 2.7 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - System & Component Testing - Coupe - 2.4L) >> Fuel Systems >> Fuel System Pressure Release

Fuel System Pressure Release

WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: ALWAYS release fuel pressure before disconnecting any fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.

Remove fuel pump relay 2, located in junction block. Fuel pump relay 2 is at C-305. See Figure . Start engine and allow engine to idle until engine stalls. Turn ignition off. Reinstall fuel pump relay 2. Fuel system components may now be serviced. Cover fuel lines with shop towel before disconnecting, as some residual fuel pressure may exist.

scientia non olet · About LEMON Manuals