LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Sebring GTC, 2.7 R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - System & Component Testing - Coupe - 2.4L) >> Miscellaneous Controls >> Ignition Switch/Starting System >> Clutch Interlock Switch

Clutch Interlock Switch

WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Locate clutch interlock clutch switch on clutch pedal bracket. Disconnect 2-pin clutch interlock switch connector C-02. Using DVOM, check continuity between clutch interlock switch connector terminals (component side). Depress clutch pedal. Continuity should be indicated with clutch pedal depressed. Release clutch pedal. Continuity should not be indicated with clutch pedal released. If continuity is not as specified, adjust clutch interlock switch and recheck continuity. See REMOVAL, OVERHAUL & INSTALLATION - SEBRING COUPE & STRATUS COUPE article. If continuity is still not as specified, replace clutch interlock switch.

scientia non olet · About LEMON Manuals