LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Touring, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Power Liftgate System >> Liftgate Latch >> Installation

Liftgate Latch: Installation

  1. Place latch in position on vehicle.
  2. Install screws attaching latch to liftgate. Tighten to 16 N.m (12 ft. lbs.) torque (Figure ).
  3. Pull downward on outside handle link and engage link to clip on latch.
  4. Connect wire connector to liftgate ajar switch.
  5. Verify liftgate fit and operation. Adjust as necessary.
  6. Install liftgate trim panel.
scientia non olet · About LEMON Manuals