Power Window Switch Continuity Table
POWER WINDOW SWITCH CONTINUITY
| SWITCH POSITION | CONTINUITY BETWEEN |
|---|---|
| FRONT WINDOW SWITCH | |
| LOCKOUT SWITCH (TOP OF SWITCH DEPRESSED) | PIN 12 AND 5 |
| LEFT FRONT UP | PIN 12 AND 14 |
| RIGHT FRONT UP | PIN 12 AND 7 |
| LEFT REAR UP | PIN 12 AND 8 |
| LEFT REAR DOWN | PIN 12 AND 9 |
| RIGHT REAR UP | PIN 12 AND 1 |
| RIGHT REAR DOWN | PIN 12 AND 2 |
| LEFT OR RIGHT REAR SWITCH | |
| OFF | PIN 2 AND 5 |
| PIN 3 AND 8 | |
| UP | PIN 4 AND 5 |
| DOWN | PIN 4 AND 8 |
To test the left front down and express down switch position, connect pin 4 to ground and pin 12 to a 12 volt source. Using a voltmeter, measure for voltage from pin 13 to ground.
To test the right front down and express down switch position, connect pin 4 to ground and pin 12 to a 12 volt source. Using a voltmeter, measure for voltage from pin 3 to ground. If the correct results are not obtained, replace the switch.