LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Front Seat Back Cover >> Installation

Front Seat Back Cover: Installation

WARNING: BEFORE SERVICING THE SEAT BACK COVER THE AIRBAG SYSTEM MUST BE DISARMED. FAILURE TO DO SO MAY RESULT IN ACCIDENTAL DEPLOYMENT OF THE AIRBAG AND POSSIBLE PERSONAL INJURY. REFER TO RESTRAINT SYSTEMS FOR SERVICE PROCEDURES.
CAUTION: Do not reuse the recliner assembly attaching bolts.
  1. Position cover at the top of seat back.
  2. Carefully roll cover down to the area that hog rings are to be installed (Figure ).
  3. Install hog rings.
  4. Roll cover downward.
  5. Engage the J-strap retainer
  6. Install new head restraint sleeve guides.
  7. Install seat back to seat cushion. Tighten bolts to 40 N.m (30 ft. lbs.) torque.
  8. Install seat in vehicle.
  9. Install head restraint.
  10. Check seat back and headrest operation.
scientia non olet · About LEMON Manuals