Natural Vacuum Leak Detection Assembly: Installation

1. Install NVLD assembly to the bracket. See Fig 1.
2. Install assembly to the fuel tank.
3. Install hoses and lines.
4. Install the fuel tank and EVAP system. See FUEL TANK  under FUEL SYSTEMS.
5. Lower vehicle.
6. Install the negative battery cable.
7. Install the air cleaner lid, connect the inlet air temperature sensor and air hose.
8. Fill fuel tank. Use the DRBIII® scan tool to pressurize the fuel system. Check for leaks.

Fig 1: Locating NVLD System

Courtesy of DAIMLERCHRYSLER CORP.