LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Instrument Panel End Cap >> Installation >> Left End Cap

Left End Cap

  1. Connect the power mirror switch wiring connector (if equipped).
  2. Place the left end cap in position and snap into place. Make sure that it is underneath the A-pillar trim and top cover.
  3. Install two screws to the left instrument panel end cap.
  4. Place left lower instrument panel bezel in position and make sure the orientation of the hinge is correct and snap bezel hinge into place
  5. Roll bezel upward and snap into place.
scientia non olet · About LEMON Manuals