LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Power Liftgate System >> Latch Striker >> Installation

Latch Striker: Installation

  1. Place striker in position on vehicle (Figure ).
  2. Align striker to outline mark on sill.
  3. Install screws attaching striker to sill. Tighten screws to 28 N.m (21 ft. lbs.) torque.
  4. Verify liftgate alignment and operation.
scientia non olet · About LEMON Manuals