LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System >> Liftgate Lock Motor >> Removal

Liftgate Lock Motor: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove liftgate trim panel.
  3. Disconnect motor wire harness connector.
  4. Remove liftgate lock motor from liftgate (Fig 1 ) by gently unsnapping.
    Fig 1: Identifying Liftgate Lock Motor Location
    G02663730Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals