LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System >> Door Cylinder Lock Switch >> Installation

Door Cylinder Lock Switch: Installation

  1. Install the Door Cylinder Lock Switch onto the door lock cylinder.
  2. Connect the wiring clip and pigtail wire connector (Figure ).
  3. Refer to DOORS - FRONT for Door Trim and Water Shield Installation.
  4. Connect the negative battery cable remote terminal onto the remoter battery post.
scientia non olet · About LEMON Manuals