LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Shift Interlock Systems) >> Symptom Tests >> Gearshift Lever Locked In Place >> Prowler

Gearshift Lever Locked In Place: Prowler

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2002 Dodge Stratus, 2002 Dodge Neon, 2002 Dodge Intrepid, 2002 Chrysler Sebring, and 2002 Chrysler Prowler. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For circuit reference, see CONNECTOR IDENTIFICATION  and/or WIRING DIAGRAMS  .
  1. Gain access to BTSI solenoid and shift interlock cable. See Fig 1 . Go to next step.
  2. Disconnect solenoid harness connector. Insert ignition key and turn ignition switch to ON/RUN position. Depress brake pedal. Attempt to move gearshift lever from Park. If gearshift lever moves, see BTSI CIRCUIT  under CIRCUIT TESTS. If gearshift lever does not move, go to next step.
  3. Disconnect shift interlock cable from floor shifter. If gearshift lever moves, replace shift interlock cable. If shift lever does not move, inspect shift lever assembly. Repair or replace as necessary.
Fig 1: Locating BTSI Solenoid (Prowler)
G00064134Courtesy of DAIMLERCHRYSLER CORPORATION