LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Door System - Rear >> Latch Striker >> Installation

Latch Striker: Installation

  1. Place door latch striker in position on vehicle.
  2. Install bolts attaching striker to C-pillar.
  3. Align striker to marked location on C-pillar and tighten bolts.
  4. Verify alignment and operation of door, adjust as necessary.
scientia non olet · About LEMON Manuals