LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Removal >> Removal - 3.3/3.8L

Removal - 3.3/3.8L

  1. Release hood latch and open hood.
  2. Disconnect battery negative cable.
  3. Disconnect the push-in field wire connector from back of generator.
  4. Remove nut holding B+ wire terminal to back of generator.
  5. Separate B+ terminal from generator.
  6. Raise vehicle and support.
  7. Remove the right front lower splash shield.
  8. Remove accessory drive belt, refer to the COOLING SYSTEM section for proper procedures.
  9. Remove the lower oil dip stick tube bolt (Fig 1 ).
    Fig 1: Removing Dip Stick Lower Bolt
    G02758901Courtesy of DAIMLERCHRYSLER CORP.
  10. Remove wiring harness from the oil dip stick tube
  11. Remove the 3 mounting bolts.
  12. Lower vehicle.
  13. Remove oil dip stick tube from vehicle.
  14. Roll and remove the generator from vehicle (Fig 2 ).
    Fig 2: Removing Generator 3.3/3.8L
    G02758902Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals