LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Component Tests >> Heated Seat Sensor

Heated Seat Sensor

  1. Disconnect and isolate the battery negative cable. Disconnect the Green 4-way heated seat module wire harness connector.
  2. Using an ohmmeter, check the resistance between cavities No. 2 and 3. The sensor resistance should be between 2 k/ohms at 60°F (15°C) and 50 k/ohms at 85°F (30°C). If not OK, replace faulty seat element and sensor assembly.
scientia non olet · About LEMON Manuals