LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Suspension >> Front Suspension >> Lower Control Arm >> Removal - Lower Control Arm

Removal - Lower Control Arm

  1. Raise vehicle.
  2. Remove wheel and tire assembly.
  3. Remove the steering knuckle. (Refer to KNUCKLE - REMOVAL  ).
  4. Remove the bolts fastening the power steering cooler to the front suspension cradle crossmember reinforcement (Fig 1 ).
    Fig 1: Removing Power Steering Cooler
    G02758953Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing.
    6. NOTE: The bolts fastening the cradle crossmember reinforcement are of three different thread sizes. Note the location of the various sizes.
    Fig 2: Removing Cradle Crossmember Reinforcement Attachment
    G02758954Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the bolts attaching the cradle crossmember reinforcement to the front suspension cradle crossmember (Fig 2 ). Remove the 2 bolts fastening the reinforcement and rear of cradle crossmember to the body of the vehicle. Remove the reinforcement.
  7. Remove the pivot bolt attaching the front bushing of the lower control arm to the front suspension cradle crossmember.
  8. Remove the lower control arm.
scientia non olet · About LEMON Manuals