LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Limited, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Removal & Installation >> Sentry Key Immobilizer Module (Skim) >> Installation

Sentry Key Immobilizer Module (Skim): Installation

  1. Place the SKIM into position.
  2. Rotate the SKIM and its mounting bracket downward and then to the side toward the steering column.
  3. Install the two screws securing the SKIM to the top of the steering column.
  4. Engage the steering column wire harness to the Sentry Key Immobilizer Module (SKIM).
  5. Install the steering column upper and lower shrouds.
  6. Install the lower instrument panel cover.
  7. Connect the battery negative cable.
  8. After SKIM is replaced, SKIM initialization procedure must be performed. See SENTRY KEY IMMOBILIZER MODULE (SKIM)  under PROGRAMMING. Sentry keys must also be programmed to new module. See SENTRY KEYS  under PROGRAMMING.
scientia non olet · About LEMON Manuals