LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Antilock Brake System) >> Rear Wheel Speed Sensor >> Installation

Rear Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2002 Dodge Ram Wagon and 2002 Dodge Ram Van. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure sensor wire to rear brake hose with clips provided.
  2. Install sensor and mounting bracket in axle housing. Install mounting bolt and tighten to 24 N.m (18 ft. lbs.).
  3. Connect wire to sensor and secure wire to mounting bracket.
  4. Remove support and lower vehicle.
scientia non olet · About LEMON Manuals