Internal ROM Test Failed
WARNING: This page is about a different car, the 2002 Dodge Ram Wagon, 2002 Dodge Ram Van, 2001 Dodge Ram Wagon, and 2001 Dodge Ram Van. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform BODY VERIFICATION TEST
under VERIFICATION TESTS after each repair
Monitored & Set Condition
- When Monitored: Monitored continuously when the ignition is ON.
- Set Condition: An internal CTM failure condition exists for when an internal test checks the CTM's RAM capability fails.
Possible Causes:
- CTM Internal ROM Test Failed
Testing
- Turn ignition on. Using scan tool, clear Diagnostic Trouble Codes (DTC). Turn ignition off. Wait 15 seconds Turn ignition on. Using scan tool, read DTCs. If scan tool displays INTERNAL ROM TEST FAILED, replace central timer module. See CENTRAL TIMER MODULE under REMOVAL & INSTALLATION. If scan tool does not display INTERNAL ROM TEST FAILED, test is complete.