LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L DOHC Engine >> Oil Pressure Sensor/Switch >> Installation

Oil Pressure Sensor/Switch: Installation

  1. Install oil pressure switch and connect electrical connector (Figure).
  2. Lower vehicle.
  3. Start engine and allow to run a minimum of 2 minutes.
  4. Shut engine off and check engine oil level. Adjust level as necessary. Refer to RIGHT MOUNT .
scientia non olet · About LEMON Manuals