LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal & Installation >> Speed Control Cable >> Removal

Speed Control Cable: Removal

  1. Remove the air cleaner lid, and makeup air hose.
  2. Remove the negative battery cable.
  3. Remove the engine cover and throttle control shield, if equipped.
  4. Remove two nuts attaching speed control cable and mounting bracket to servo.
  5. Remove servo from the mounting bracket. See SPEED CONTROL SERVO  .
  6. Disconnect electrical connectors and vacuum hose.
  7. Remove retaining clip holding cable to servo.
  8. Remove throttle cable clasp from the throttle body cam.
  9. Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable.
  10. Compress the retaining tabs on the cables and slide cables out of bracket.
scientia non olet · About LEMON Manuals