Slave Cylinder: Removal

NOTE: Replacement slave cylinder assemblies come pre-filled with fluid. No fluid service or system bleeding should be required, unless excessive air has been introduced to clutch hydraulic circuit. (Refer to STANDARD PROCEDURE - BLEEDING CLUTCH HYDRAULIC CIRCUIT (LHD/RHD MODELS) ).

Raise vehicle on hoist.
Disconnect clutch hydraulic quick connect using tool 6638A. (Fig 1).

Fig 1: Disconnecting Quick Connect Using Tool 6638A
Courtesy of DAIMLERCHRYSLER CORP.
2.0L models: Remove left lateral bending brace.
Remove damper bracket nuts. (Fig 2).

Fig 2: Removing/Installing Slave Cylinder - 2.0L Shown
Courtesy of DAIMLERCHRYSLER CORP.
Remove slave cylinder mounting bolts. (Fig 2).
Remove slave cylinder from vehicle.