LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Neon LE, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

NOTE: Before proceeding with this procedure, refer to WARNING .
  1. Raise the vehicle.
  2. Remove both stabilizer bar links from the vehicle. (Fig 1). Remove each link by holding the upper retainer/nut with a wrench and turning the link bolt.
    Fig 1: Removing/Installing Stabilizer Bar
    G01048569Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the stabilizer bar cushion retainer bolts and retainers, and remove the stabilizer bar with cushions attached from the vehicle. (Fig 1).
  4. To remove the cushions from the stabilizer bar, peel back each cushion at the slit and roll it off the bar.
scientia non olet · About LEMON Manuals